Service

no images were found

Motoworx Racing offers a number of services to meet your manufacturing needs. We offer vertical CNC milling, CNC turning as well as a healthy compliment of manual turning and milling machines. We also service late model front and rear offroad suspension components from all the top manufacturers.

lease call or email for a quote on any of your above needs.

81 Responses to “Service”

  1. jaime serrano aka warriorsimi October 2, 2013 at 3:50 am Permalink

    don’t know if i asked this before but can you or do you make 2.2 wheels with a 17mm hex to run on madforce wheels if so how much thanks in advance.will be running either rockbeast 2 or tsl’s.

    • Jake October 2, 2013 at 1:41 pm Permalink

      I have made them before but the design is outdated and wouldn’t work with my exisiting rings. I can make you and updated set that would look like the 2.2 10 hole le with the 17mm hex. I might be able to do the 8 spoke design as well. Price would be $200.00
      Thanks
      Jake

    • Ellis Sanders October 20, 2016 at 4:28 pm Permalink

      Hi jake I love your products those rims are awesome , I run the 2.2 rims but I would like to know if it’s possible for you to make them 2.0-2.2 inches wide or make a widener to add another 1inch to the width of the wheel? Or can the widener you have available be used in multiple on one rim?

      • Jake October 20, 2016 at 5:26 pm Permalink

        You can use multiple wheel wideners provided you can find screws long enough to put two together. A 25mm long screw may do that. You can also put a wheel widener on each of the wheel.

  2. Aaron January 31, 2015 at 4:35 am Permalink

    Any idea how the 2.2 10 hole LA fit on a Axial Wraith with Vanquish knuckles? Looking to be stock width or narrower. Also no need to buy separate hex hub ther cut in already wright? (Just rings and caps?)

  3. Curt August 31, 2015 at 10:52 pm Permalink

    Do you make anything for the Traxxas slash 4×4? Your new style 2.8 are beautiful.

    • Jake September 10, 2015 at 3:13 pm Permalink

      Nothing other than the 2.8 wheels. Don’t know if they would work on the slash or not.
      Thanks
      Jake

  4. Ken December 18, 2015 at 5:04 pm Permalink

    Do you know when the wheel wideners 16 hole will be coming off back order?

  5. Jason Kerwick January 8, 2016 at 4:27 pm Permalink

    Just placed a order and forgot to order some ring hardware and hub hardware also had a question on the hubs was wondering if the vanquish hubs work

    • Jake January 8, 2016 at 5:02 pm Permalink

      The wheels will come with the necessary screws. So unless you wanted extra you are fine. Yes they will work with vanquish hubs

  6. joe January 18, 2016 at 10:44 am Permalink

    hello jake
    how long till the raw 7 spoke 1.9s will be back in stock?

    • Jake January 18, 2016 at 3:32 pm Permalink

      It will be about a week. Currently my 1.9 machine is down otherwise I could get them made right away for you.

      • joe January 25, 2016 at 10:38 am Permalink

        how long if u wer to cut them right away?

  7. Stephen January 21, 2016 at 11:29 am Permalink

    I have a set of raw 2.2 10 hole wherls. I need 4 red rings. You have 2 in Stock. When will you have more available?

    • Jake January 21, 2016 at 11:06 pm Permalink

      If there the older style wheels that had 20 holes than I can only make raw in those. If there the new style with 24 holes than those are in stock.

  8. Stephen January 21, 2016 at 11:09 pm Permalink

    Yes they are older style 20 screws. I guess I’ll look at new wheels for the build

    • Jake January 29, 2016 at 8:32 pm Permalink

      If you do update use coupon code mwx15 for discount
      Thanks
      Jake

  9. Keith February 10, 2016 at 1:29 am Permalink

    Hi Jake I need more center cap screws and can’t seem to find a place to purchase them on your site. I see the 2mm screws but I think the center cap screws are 1.5mm or less. Can I purchase more from you? There are 8 per wheel so I’d like to get another full set, 32 would do but if you have a minimum I’d gladly purchase more, 50 would be fine.

    Thank you Jake,

    Keith

  10. Brian Crites February 17, 2016 at 11:23 am Permalink

    Can you do the shark bite rings in red for the 2.2 32 bolt beadlock wheels you make. There is only 3 of those wheels when will you have more in raw.
    Thanks
    TINY

    • Jake February 17, 2016 at 4:31 pm Permalink

      A 16 hole red shark bite ring would work on that wheel. But to make a 32 hole red shark bite ring would require custom work and custom charges.
      I can have more raw wheels made in a day or two. I will set the product to be allowed to back order so if you want to go ahead with your order I will get on it.
      Thanks
      jake

  11. Brian Crites February 17, 2016 at 6:10 pm Permalink

    Do you make your wheel spacers in black

    • Brian Crites February 17, 2016 at 6:12 pm Permalink

      Sorry wheel wideners

    • Jake March 1, 2016 at 10:00 pm Permalink

      Just have raw right now, I can get some done in black but it would probably be 2 or 3 weeks

  12. Feliciano March 3, 2016 at 3:57 pm Permalink

    Hello, so I want to make sure before purchasing, the price listed is for 1 wheel not a pair and the rings are seperate from the wheel? Also will the 2.2 fit the VP slw hubs?

    • Jake March 3, 2016 at 4:22 pm Permalink

      Yes wheels are sold individually. The inner ring is included. The outer ring is purchased seperately in the ring category of the website.
      Yes, SLW hubs will work with my wheels designated SLW. HD wheels have the hex machined into the back side.
      Thanks
      jake@motoworxracing.com

  13. Feliciano March 3, 2016 at 4:47 pm Permalink

    When do you thin the blue rings for the 16s will be done. There are only 2 available?

  14. Ryan M. March 6, 2016 at 3:22 pm Permalink

    Hi there I’m looking to add some offset to my wraith to get the tires away from the body and give it a bit more stability, if I had slw wheels I could just get new extended hexes but I have your HD 8 spokes so I was wondering if you’d be willing to machine some hex extenders that would work more like an slw but would mount using longer screws through the holes where the hubs mount. Im a cad designer it’s just the shop I work for, wouldn’t do it for less than a few hundred bucks… so I can draw the part no problem. I was just wondering what your idea on this would be and how much you charge.
    Thank you.
    Ryan.

    • Jake March 6, 2016 at 3:54 pm Permalink

      At some point there were longer hexes made to accomplish this. Don’t know if there still out there or not.
      You can send me a drawing and I will look it over and see. But a few hundred to create something new is not out of the realm of possibility when you figure all the setup work and programming that is involved.

      • Keith March 16, 2016 at 1:59 am Permalink

        Asia Tees have these in aluminum. I have them on mine. I beleive from 1/2″ to 2″ extenders

  15. Steve March 12, 2016 at 5:48 pm Permalink

    Do you know the weight of a complete 2.8″ wheel with rings and bolts? I am curious to know to compare with my plastic wheels.

    • Jake March 13, 2016 at 5:18 pm Permalink

      It is about 7.5 oz. without a tire and a hub.

  16. joe March 14, 2016 at 1:47 pm Permalink

    hello jake.
    just wanted to know how much longer till the 1.9 7spoke raws will be till i can purchase?

    • Jake March 16, 2016 at 9:51 pm Permalink

      I set them to be able to back order. I can have them made in a day or two. You can go ahead and order and they will ship when I get them done.

  17. Keith Bartholomew March 16, 2016 at 9:28 pm Permalink

    Hello
    Just want to know if you are going to get more of the 1.9 hdx rings in red?
    Thanks

    • Jake March 16, 2016 at 9:45 pm Permalink

      Yes,
      Should have them back from anodize next week sometime.
      Thanks

      • Keith Bartholomew March 16, 2016 at 9:47 pm Permalink

        Great thanks!

  18. Mike Browne April 16, 2016 at 5:04 pm Permalink

    Afternoon. I am interested in your 3.8 Wheels. Do you offer a 12mm Hex hub?

    • Jake April 16, 2016 at 5:36 pm Permalink

      No but you could just buy 17mm hexes from Axial.

      • Mike Browne April 16, 2016 at 5:49 pm Permalink

        I would be running these on a custom 1/6 scale using Axial AR60’s and the 17mm Axial Hex do not work for the axle size. Thanks for the response though.

  19. Micheal May 20, 2016 at 5:22 pm Permalink

    On the 1.55 wheels with the rc4wd hubs fit your wheels?

    • Jake May 20, 2016 at 6:22 pm Permalink

      Don’t know. They fit Vanquish slw hubs or my hex hubs.

      • Micheal May 21, 2016 at 8:30 pm Permalink

        All I see are hubs for the 3.8 wheel. Unless I’m missing something.

  20. Heidi Roy June 2, 2016 at 9:48 pm Permalink

    Hey, we will be travelling through your way end of June , on the way to L.A. can you do a simple oil change for my Yamaha 1100 V Star…

    • Jake June 2, 2016 at 10:06 pm Permalink

      I could but i am more equipped on the Dirt Bike end of things. I don’t have the info or specs for that bike so having your manual would make it easier. You can email me at jake@motoworxracing.com if you want to schedule it.
      Thanks
      jake

  21. Erik June 20, 2016 at 6:22 pm Permalink

    Hey I was wondering if your wheel wideners would work on the VP method 101’s (1.2″ wide version)?

    • Jake July 10, 2016 at 4:43 pm Permalink

      Don’t know, Most likely The hole pattern and wheel diameters are different. I could make some to fit but I would need a wheel. You might consider upgrading to my wheels

  22. Chris July 9, 2016 at 1:18 am Permalink

    Will the 24 hole widener work on vp wheel? Thank you.

    • Jake July 10, 2016 at 4:40 pm Permalink

      No, The hole pattern and wheel diameters are different. I could make some to fit but i would need a wheel.

  23. Reindale Hill August 13, 2016 at 2:54 am Permalink

    I’m interested in a set of your 1.9 wheels. On the outer rings what size screws does it take? I want to upgrade to scale hex head bolts.

  24. Ellis Sanders October 20, 2016 at 5:29 pm Permalink

    Hi jake I love your products those rims are awesome , I run the 2.2 rims but I would like to know if it’s possible for you to make them 2.0-2.2 inches wide or make a widener to add another 1inch to the width of the wheel? Or can the widener you have available be used in multiple on one rim?

  25. Ellis Sanders October 20, 2016 at 5:32 pm Permalink

    Also would like to know when will you have the 2.2 HD razor wheel back in stock?

  26. Ellis Sanders October 20, 2016 at 5:35 pm Permalink

    Thanks for you response!

  27. Juan October 24, 2016 at 6:27 pm Permalink

    Can an older version still be made ? I have three 8 hole 2.2s older version that have 20 screws in the out ring. I need one

    • Jake October 28, 2016 at 1:12 pm Permalink

      No, I pretty much eliminated those files from existence. I could make them but it would not be cost effective for you. I can give you a discount on upgrading to my current wheels.

  28. Dan Baldus October 26, 2016 at 2:30 am Permalink

    Hi Jake, will a 16 hole outer ring work with the stealth 2.2 rim, i have an extra set of 16 hole rings is why i ask.
    Thanks
    Dan

  29. Brian miller December 1, 2016 at 2:54 pm Permalink

    can u make custom 2.2″ wheels

  30. Brian miller December 2, 2016 at 10:59 pm Permalink

    when will the 2.2 razor HD wheels have more than 2 in stock?

  31. Chris December 6, 2016 at 5:41 pm Permalink

    Was wondering when the 18 hole 1.9 raw aluminum beadlock rings were gonna be back in stock

    • Jake December 6, 2016 at 6:30 pm Permalink

      If they are indeed out I can have some made in a day or two. I may already have done that though and just not have updated my stock. You are safe to backorder them and they will ship asap.
      Thanks
      Jake

  32. Joeyb February 1, 2017 at 8:19 pm Permalink

    Hello im interested in buying the 2.2 hd 10 beadlock rims and wondering if you can make them to run slws. Thank you

    • Jake February 3, 2017 at 1:34 pm Permalink

      I could but it would be a week or two and longer if you wanted them anodized. Would also require them to be pre paid.

  33. Brian March 2, 2017 at 6:27 pm Permalink

    Hey i am just wondering what i all would need when I order some 1.9 10 hole HD wheels from you.

  34. Brian March 13, 2017 at 12:45 am Permalink

    I am just wondering if the vanquish slw hubs will work with your slw wheels

  35. Philip April 29, 2017 at 2:45 am Permalink

    How much would a complete set of the 2.2 stealth wheel would be everything that I would need to mount 4 tires thanks phil

    • Jake April 29, 2017 at 3:53 am Permalink

      You would need four 2.2 outer rings found in the rings drop down menu, 4 wheels that include the inner rings with each wheel, 4 detachable hex hubs found in the accessories section, and optional center caps. Add the items you want to your cart and it will tell you how much. Theres several options and I don’t have enough info to give you an exact price. Email me at jake@motoworxracing.com if you need more help.
      Thanks
      J

  36. youngperformance May 14, 2017 at 2:31 pm Permalink

    Any idea when the powder coated 1.55 outer rings will be avail in sets of 4? I really need a set and I am ready to purchase. Thanks

    • Jacob Hogan May 14, 2017 at 4:30 pm Permalink

      FYI they’re anodized not powder coated. I am shipping some off to be Anodized tomorrow. IT will be 2 weeks most likely before I can ship. I do have raw available.
      Thanks
      Jake@motoworxracing.com

  37. Nathaniel June 6, 2017 at 2:47 am Permalink

    Is it possible to return a wheel meant to buy the hd wheel not the SLW wheel

    • Jacob Hogan June 8, 2017 at 12:25 pm Permalink

      Yes, you can return it.
      Motoworx racing
      340 Humboldt dr
      Canon city co
      81212

  38. Dayton July 10, 2017 at 6:22 am Permalink

    Hi do the wheels work with vanquish slw hubs

    • Jacob Hogan July 10, 2017 at 2:24 pm Permalink

      Not sure which wheels specifically you want to know about but the 2.2 and 1.9 wheels designated SLW are compatible with Vanquish SLW Hubs. The wheels designated HD have the 12mm hex machined into the back.
      If you have further questions please email jake@motoworxracing.com
      Thanks
      Jake

  39. JEFF HELMS July 12, 2017 at 1:12 am Permalink

    Hello,
    I just purchased my first AXIAL SCX10 II for my son’s birthday and he is wanting to do spend some of his birthday money on upgrades. He really likes the 1.9’s limited edition 6 spoke wheels in the Black with edges machined. What would be the price on a full set and do the wheels come with the rings and center caps? Also, can the rings and caps be ordered in different colors? We are new to this, so would you recommend sticking with the 1.9’s that came on the truck or should we put the 2.2’s on it?
    Thank you very musch for your time, JEFF HELMS

  40. Michael DuVaul October 4, 2017 at 4:51 am Permalink

    Hi, I purchased your Motoworx 2.2 Dually 8 Spoke RC Wheel Set Raw Finish.
    How long before the Motoworx Racing Dually .200″ HEX HUB EXTENDER come off of back order. I need 12 of the extenders to complete my project.
    Thank You
    Michael DuVaul

    • Jacob Hogan October 9, 2017 at 8:48 pm Permalink

      Seems like I just made a bunch of those. I will do some checking and update the stock if I have them.
      thanks
      jake

Leave a Reply